Sélectionner une page

Comment l'excavatrice utilise l'hydraulique?

La pelle hydraulique est actionnée par l'utilisation de l'hydraulique, où un liquide est un milieu d'alimentation. Ici, hydraulic fluid is sent to numerous hydraulic motors and hydraulic cylinders throughout the machine and is pressured in accordance with the resistance present. Control valves direct or automate the distribution of the fluid through hoses and tubes.

Excavators get huge power to perform heavy earth moving tasks because to the extremely large quantity of power that can be transported through compact tubes and flexible hoses, as well as the high power density and wide variety of cylinders.

Depending on the load’s pressure, there are two different forms of excavation. One is excavation motion, which involves a heavy excavation load and has a significant, unpredictable consequence from its contact with the earth. The other is excavation motion, which has a light excavation burden and has a negligible influence on the ground material’s unpredictable interaction.

 How a Hydraulic cylinder works here?

The basic components of an excavator are the cab, bucket dipper, and cylinders boom. The hydraulic cylinder has a #rod, which makes up the inside of the cylinder, and a #piston, which is located at the end of the cylinder and uses hydraulic fluid to move the arm. The piston would fall to the bottom of the cylinder if there was no fluid present, but because hydraulic fluid has a constant volume, this is never the case.

Pumping hydraulic fluid through the piston’s tip causes the rod to be forced into the cylinder, producing a powerful force that causes the hydraulic pressure difference of each cylinder in the boom, arm, and bucket to fluctuate. resulting in the movement of either one or both arm components. The precision of the arm may be readily changed by adjusting the flow of fluid through the valve. Control valves placed within the cab where the driver seat is located are used to initiate this movement.

This force enables hydraulic excavators to perform heavy lifting, high-power demolitions, and other difficult heavy earthworks. The hydraulic cylinder snubbers at the rod ends of the boom cylinders and both ends of the stick cylinders absorb shocks, reduce noise, and lengthen cylinder life, keeping the machine in operation for a longer period of time.

Excavators are employed in building, excavating, material handling, forestry, landscaping, and any other difficult excavations because to their tremendous dynamic power.

This makes it easier to understand how important hydraulic cylinders are to hydraulic excavators. Additionally, Seahydrosystems is here to make your job easier by creating both the custom cylinders and the regular cylinders needed for your excavators.

For more informations,contact tongzhou@fjtzm.com